Hydraulic Cylinders are commonly used tools in auto repair, rescue and engineering operations, but if they are not used properly, it will not only affect the use effect, but may also bring safety hazards. Only by mastering the correct use method can the operation be smooth and safe.
Check the Hydraulic Cylinder: Check whether the hydraulic oil is sufficient before use to ensure that there is no oil leakage or damage.
Choose a flat ground: operate on a hard and level ground, avoid using it on soft or sloped ground to prevent the equipment from tilting.
Find the support point: There is a special Hydraulic Cylinder support position at the bottom of the vehicle (refer to the car manual), do not support it on vulnerable parts such as the fuel tank and exhaust pipe.
Steady jacking: Shake the handle to rise at a uniform speed until the tire is off the ground. Do not overload and ensure that the tonnage of the equipment is greater than the weight of the vehicle.
Fix the vehicle: After jacking up, support the vehicle with a bracket or pad to prevent the equipment from falling suddenly.
Slowly descend: After use, slowly unscrew the oil release valve (rotate counterclockwise) to let the vehicle fall steadily to avoid rapid descent and damage to the equipment.
Storage and maintenance: wipe it clean after use, store it in a dry place, and check whether the hydraulic oil is sufficient regularly.
Correct use of Hydraulic Cylinders can not only improve work efficiency, but also avoid accidents. Check before each use, pay attention to safety details during operation, and store properly after use, so as to extend the life of the tool and ensure your own safety.
