The safe operation specifications of Hydraulic Pipe Benders are crucial. Here are some key steps and requirements:
Before operating a hydraulic pipe bending machine, be sure to fully inspect the equipment. Check whether there are cracks or deformations on the machine body, whether the screws at each connection are loose, whether there are signs of oil leakage at the oil pipe joints, and ensure that the control buttons are pressed and popped up smoothly. Select the mold accurately according to the pipe specifications, align the positioning holes during installation, and tighten the fixing bolts to prevent the mold from shifting or falling off. At the same time, clean up the work area, remove tools and debris, set up warning signs, and strictly prohibit unrelated personnel from approaching.
When operating, first turn on the power supply, run it at no load for 3-5 minutes, and pay attention to whether the motor has any abnormal sound and whether the hydraulic gauge value is stable. Place the pipe gently on the workbench and adjust the position so that the center of the pipe completely overlaps with the center of the mold. According to the pipe material, pipe diameter and bending requirements, accurately set the bending angle and speed on the control panel. For example, for stainless steel pipes, set the speed to low gear and increase the bending force appropriately. During operation, operators must not touch the mold and pipes, and always keep a close eye on the operation of the equipment. Once an abnormality is found, press the emergency stop button immediately.
After the operation, reset the control button to zero first, and then cut off the power supply after the equipment stops completely. Use a brush and special cleaning agent to clean the debris and oil on the mold in time, replace the hydraulic oil regularly, check the wear of key components, and tighten loose parts to ensure the safe and stable operation of the equipment.
By following the above specifications, the safe operation of the Hydraulic Pipe Bender can be ensured, while improving processing efficiency and product quality.
