I. Damage to the steel bar
Due to the process of extrusion pressure of Steel Cold Extrusion Machine is too large, will lead to fatigue damage to the steel bar, affecting its normal extrusion. At this time, you need to replace the damaged steel bar to ensure that the cold extruder can work properly.
Second, the pump body leakage
If the cold extruder pump body leakage phenomenon, will lead to insufficient pressure. At this time you need to check the Steel Cold Extrusion Machine pump body sealing rubber ring, if found damaged or aging, need to be replaced in a timely manner.
Third, the pump throat blockage
Pump throat clogging is also one of the reasons why the cold extruder pressure, often use the machine pump throat is easy to accumulate dust or impurities, resulting in insufficient flow, ultimately leading to the formation of pressure. At this time you need to clean the pump throat, or replace the new pump throat.
Four, other reasons
At the same time, if the cold extruder of Steel Cold Extrusion Machine is not used for a long time or the use of the process is not in accordance with the instructions for use, will also lead to the formation of pressure. At this time you need to check the instruction manual, according to the requirements of the manual to use the machine.
In summary, there are many reasons that lead to no pressure on the rebar cold extrusion machine, which need to be checked and troubleshooting according to the specific situation. In the process of daily use, you also need to use and maintain in accordance with the requirements of the manual to ensure the normal operation of the equipment.
